New-Technology
Latest Generation Pixim DPS "Seawolf Chip" 10X Higher
Sensitivity Outdoor Indoor
Automatic Iris Day Night Infrared
Wide Dynamic Progressive-Scan Security Camera extraordinarily
High 690 HTVL effective Resolution
|
|
|
| Latest generation "Seawolf
Chip" Security Camera with totally new Digital Pixel System (DPS)
Imaging Technology from Pixim. Security
Camera with versatile Automatic Iris Variable Focal Length Lens
suitable for Outdoors & Indoors & High to Zero illumination levels,
excels in difficult High Contrast & Back-Lit conditions.
|
|
|
OPTIONS
|
|
|
|
|
|
|
|
Microphones better than inbuilt microphones
from $5 |
This Security Camera is perfect for
monitoring
&
recording,
versatile variable focal length "AI" Lens for
Tight 1.2 m wide shots @ 3 metres & wide 25+ m shots @ 15 m.
Suitable for Warehouses, Homes, Factories,
Showrooms, Offices sheltered Outdoor use (under eaves) &
Total-Darkness with illumination provided by the inbuilt Infrared
Illuminator.
Use out-of-the-box or use the easy
On-Screen Setup menu via
push-buttons on side of Camera to tailor parameters to cope with
difficult lighting.
Better than a Dome
No IR-Lens leak-through that causes washed out low contrast images.
a lower cost Pixim Seawolf Security Camera |
|
Outdoor (Indoor) Water Resistant Security Camera with DPS Imaging
technology that solves many of the shortcomings of conventional CCD
and CMOS sensors, this Pixim Seawolf Chip solution is excellent for
most common and many difficult Security Surveillance applications.
The Automatic Iris Lens copes with high illumination levels,
improves depth-of-field and passes maximum possible light under low
and zero illumination.
Specifically designed for surveillance in domestic and commercial
situations this Security Camera can be easily added to an existing
Security Recording system (or replace an under performing CCD
Camera), simply connect Video Output from Camera to an unused
Security DVR Video
input.
This
Security Camera can be easily connected to the Composite Video Input
(AV, Yellow RCA socket) on most TVs and Domestic or commercial
Recording Devices, if required a
Microphone can be easily added and a
single small diameter
Cable
used to carry Video, Audio & Power 20 or more metres.
Powered by Pixim's 'Seawolf Solution' this Security Camera has an
extraordinary 690 HTVL effective resolution,
this is far better than conventional Security Cameras,
HTVL Effective Specification.
Better
than a Dome, separate Lens and
LED glass stops harmful transmission of Infra-Red from Light
Emitting Diodes to Lens that is inherent with a one-piece Dome
leading to reduced contrast and a washed out image.
|
| All values are
approximate. |
@ 3
metres |
@ 5
metres |
@ 9
metres |
@ 15
metres |
| Width of Vision @
2.8 mm setting |
5.1
metres |
8.5
metres |
15.4
metres |
25.7
metres |
| Width of Vision @
12 mm setting |
1.2
metres |
2
metres |
3.6
metres |
6
metres |
| Additional
Security Camera Lens information |
|
|
|
|
|
|
|
|
Ordinary CCD Camera
Backlight compensation Off |
Camera using Pixim®
Digital Pixel System® |
|
|
|
|
Detail lost in underexposed areas |
Indoor & outdoor detail
visible |
|
Ordinary CCD Camera
Backlight compensation On |
Camera using Pixim®
Digital Pixel System® |
|
 |
 |
| About
Pixim: Pixim Inc. has developed unique imaging technology
that revolutionizes the way video cameras capture and process
images. Unlike traditional image capture technologies, where each
pixel cannot adjust to highlights and lowlights in the same scene,
Pixim's patented Digital Pixel System® technology empowers hundreds
of thousands of pixels to act like individual cameras constantly
self-adjusting. This all-digital system enables Pixim-powered
cameras to efficiently capture the whole picture, regardless of
lighting condition or application - thus securing the highest
resolution, natural color and clarity, while automatically
eliminating image-compromising visual noise (e.g., glare,
reflections). The result is more than superb image quality; it is
accurate, actionable information that gives users the strength of
certainty. Seawolf
D8800C Specifications.
Lens:
Variable Focal Length
IR focus-shift corrected
2.8 ~ 12mm Automatic Iris
with external Focus & Focal Length adjusters,
copes with High levels of illumination, passes more light and
provides greater depth-of-field than ordinary fixed Iris Lenses.
There are no optional Lenses
for this Camera,
security camera lens information.
Image Device:
Progressive-Scan
Seawolf Solution 768 (H) 548 (V)
420 864 Pixels
758 (H) 540 (V) effective pixels
⅓"
format 7 µm x 7 µm pixel size, CMY Colour Array
PIXIM® Wide Dynamic Digital
Pixel System®
Effective resolution 409 320 pixels.
Sensor / DSP
HTVL-effective Resolution:
690 HTVL-E
better than Super-VHS near SDTV/DVD resolution.
Pixim Whitepapers:
HTVL Effective Specification &
Camera Resolution Is Limited to 540 HTVL Maximum in CCTV Systems
Horizontal Resolution: 540 HTVL (720H),
this
value is provided for comparative purposes only.
Sensor Vertical Resolution: 540 VTVL,
this
value is provided for comparative purposes only,
significantly better than conventional interlaced CCD sensors.
Sensitivity: ~
0.1 Lux @ F1.2, 50
IRE, 25 fps, CMY (this
value is provided for comparative purposes only)
Camera produces images in total darkness when
Infrared LEDs are 'ON'.
Video System: 2:1 Interlace
switchable between PAL
50/625
or
NTSC 60/525. PAL 50 Hz
vertical, 15 625 Hz horizontal. Compatible with TV Systems in
Australia, NZ, UK, USA, Japan, etc.
Video Output: Composite Video 75 ohms
1.14 V p-p, BNC socket
on ~ 70 cm cable,
suitable for TV, DVR, VCR, AV & Video
inputs in Australia, NZ, UK, USA, Japan, etc.
Automatic Electronic Shutter (AES):
1/25 to 1/30 720 second.
Dynamic Range (more):
102 dB typically, 120 dB maximum,
Dynamic Range is illustrated on this page.
Smear (more):
Zero for most practical purposes, copes with highlights
better than ordinary CCD cameras,
Smear is illustrated on this page.
Spectral Response:
~ 400 to ~ 1100 nm with Infrared
'CUT' Filter 'out' of optical path.
Signal to Noise ratio (SNR): up to 50
dB, measured with AGC off.
Back Light Compensation (BLC):
Automatic, On/Off.
Noise Reduction: 3D,
Motion Adaptive.
Flicker Reduction: 'Pixim'
Enhanced Flicker Reduction.
Gamma: 0.45.
Infrared Illuminator: 48 Light Emitting Diodes
(LED), automatically switch On/Off depending on illumination level.
Depending on Lens 'focal length' setting LEDs illuminate up to ~ 80%
of the Width-of-Vision at up to ~ 20 m depending on the Infrared
reflective characteristics of subject. Objects closer than ~ 2
metres may be overexposed when illuminated by LEDs.
IR-CUT motorised movable Infrared Cut Filter:
Yes, details below.
*Day/Night setting =
Automatic:
 more
In Day mode (well lit, colour) mechanism
automatically positions IR-CUT optical filter between Lens and Image
Sensor to exclude Infrared radiation that would otherwise adversely
affect colour reproduction, this ensures colour
rendition not possible with ordinary non-filtered or
notch-filter type Day/Night cameras.
In Night mode (low light, monochrome) mechanism
automatically removes IR-CUT optical filter to allow Infrared
radiation to pass boosting low light and Infrared sensitivity, the
result is significantly better night images using inbuilt
Infrared Illuminator
or with Infrared rich light sources. Infrared
Response without Infrared filter is ~
700 to ~ 1100 nm
better than a
'Security
Camera notch IR Filter', additional
Security Camera Infrared Night Vision information.
On-Screen-Display Setup:
All menu functions and parameters are easily set via
Up/Down/Left/Right/Enter push button on side of Camera.
Camera Setup: Due to ongoing product
development all or some of the functions listed below may not
be available with this Camera.
To Access Press & Hold Enter
"WDR Control" Low / Normal / Medium / High / Presets.
"BLC" Off / On.
"White Balance" ATW / AWB
"AGC" Low / Normal / High
"Lens Select" Manual / DC.
"Fluorescent" Off / CRR.
"D/N Control" Off / Auto / GPIO.
Save & Exit / Reset Camera to Default settings / Cancel changes.
We suggest using Default settings with small changes to WDR, BLC,
White Balance, AGC & Fluorescent as/if required.
Advanced Menu 'for specialists':
Not recommended for regular users & not supported.
To Access Press Left, Right, Left, Right & Down.
"Presets" Vivid / WD_Normal / Normal.
"Exposure" 50i, 25p.
"AGC" Custom Bias -18 to 18 / Limit 0 to 60.
"Range Ctrl" Low / Normal / Medium / High / Custom Bias -30 to 30 /
Limit 0 to 36.
"Exposure Pref" Highlights / Shadows.
"Shutter Mode" Off / Auto / Manual Shutter Limit 2X -25FPS,
4X-12FPS, 8X-6FPS, 16X-3FPS, 32X-1FPS, 64X-1FPS.
"Meter Method" Median / Mean.
"Gain Mode: AGC / Manual -48 to 60.
"Range Mode" Auto / Manual 0 to 30.
"Transitions" Presets Slow / Norm / Fast. Exposure Transitions -
Filter 0 to 4000, Hyst 0 to 4000, Trans 0 to 4000. Range Transitions
- Filter 0 to 4000, Hyst 0 to 4000, Trans 0 to 4000.
"White Balance" Mode - ATW Xtnd / ATW Normal / ATW Desat / AWB /
Manual Adj Mode Kelvin / R/B. Meter Method Mean / Median.
"Viewing" PTZ - Zoom 1 to 4, Pan -100 to 100, Tilt -100 to 100, Flip
- Off / Horiz / Vert / Both. Render Intent - Movie / Info. Privacy
Mask Setup - Off / Colour White-Black-Red. ID Display - On / Off. ID
Position - Up-Left, Up-Center, Up-Right, Down-Left, Down Right.
"Setup" Most of the parameters except Video Standard PAL / NTSC &
Video IRE Level may not be relevant to this camera.
Power Requirements: 12 VDC
Regulated or 24 vac, ~ 2.5 Watts LEDs Off, ~ 7 Watts with LEDs On,
via stripped & tinned wires Red = +, ~ 70 cm Cable. Consider
cable resistance when installing, ask us about solutions if voltage
drop is a problem with existing wiring.
Dimensions (mm): ~ 285 x 96 x 125.
Mass (grams): ~ 1225, Sunshade ~ 80.
Manufacturer: 18+ years experience. ISO 9001, CE, FCC, RoHS
certification. OEM & ODM supplier.
Made in China. |
|
|
|
|
Watch Video
